Product center
Product center
CLK diffused cyclone
The structure of the dispersive cyclone dust collector is characterized by the cone turning into an inverted cone and the reflection screen fixed by gas at the lower part, which can avoid the secondary dust collection caused by the enrolling and enrolling of the upswirl airflow returning from the upper part of the dust, so it can improve the dust removal efficiency. On the other hand, the cross section of the inverted cone is smaller and larger, so that the swirling velocity of the dusty gas in
XLP/A, XLP/B type cyclone:
The CLT/A cyclone has a downward spiral tangential inlet. In addition to being used as a single cylinder, it can also be used in combination with double, three, four and six cylinders. The combined type should mark the number and diameter of the cylinder. The four-barrel D55 is labeled CLT/ A-4X5.5. The combined structure and bracket are detailed in HVAC standard T505. Figure 4-13 shows the CLT/A type cyclone. Table 4-12 and Table 4-13 list the features and dimensions of the CLT/A cyclone
CLT/ Type A cyclone
The CLT/A cyclone has a downward spiral tangential inlet. In addition to being used as a single cylinder, it can also be used in combination with double, three, four and six cylinders. The combined type should mark the number and diameter of the cylinder. The four-barrel D55 is labeled CLT/ A-4X5.5. The combined structure and bracket are detailed in HVAC standard T505. Figure 4-13 shows the CLT/A type cyclone. Table 4-12 and Table 4-13 list the features and dimensions of the CLT/A cyclone.
Article recommendation
Case presentation